MINOLTA-QMS magicolor 6100 Series Service Manual page 302

Page 7-102
7.8.5.2 Lower Solenoid Assembly
7.8.5.2.1
7.8.5.2.2
Relay P.W.B
Harness
Put the Actuator in the hole of the Switching Shutter L
while assembling the Lower Solenoid Assembly.
7.8.5.2.3
Tools
Phillips Screwdrivers #1 and #2
Disassembly Procedures
(see Fig. 7-102)
1. Remove two set screws (ST3x6) from the bottom paper
guide.
2. Remove the bottom paper guide.
3. Remove the harness cover.
4. Remove the lower solenoid assembly motor harness con-
nector CN3 from the Relay P.W.B.
5. Remove the harness from the clamp.
6. Remove the solenoid assembly.
Fig. 7-102
CAUTION:
Assembly Procedures
1. Reassemble in reverse order of disassembly.
magicolor 6100 Series Service Manual