Message "CHECK WASTE TONER" displayed.
14
Is the Waste Toner Bottle installed?
Is Waste Toner Bottle installed properly?
Inspect the Waste Toner Bottle Sensor Switch.
Is the Sensor Switch damaged ?
Is the Harness Connector of the Sensor Switch disconnected?
Check and replace associated wiring and hardware.
No
Page 8-16
Yes
No
No
Replace IOD2 P.W.B.
Is Error Code 14 cleared ?
No
Is Error Code 14 cleared ?
Yes
Complete
No
Yes
Yes
Yes
Fig. 8-9
Install the bottle properly.
Replace the Sensor Switch.
Connect the connector.
magicolor 6100 Series Service Manual