MINOLTA-QMS magicolor 6100 Series Service Manual page 408

8.5.23 Insufficient Fusing
Page 8-94
8.5.23.1 Phenomenon
The printed image
is partially missing as shown in the print sample at the upper-right corner.
8.5.23.2 Main Causes
1. The user selects the wrong type of media (e.g., thick stock) either on
the host or at the control panel of the printer.
2. Recommended paper is not used.
3. Failure of the fuser unit.
Cleaning
Roller
Fuser
Backup Roller
8.5.23.3 Countermeasures
1. Adjust the mode on the host side or the control panel to match the
print media used.
2. Use the recommended paper.
3. Replace the fuser unit.
Oil
Bottle
Fuser Roller
Fig. 8-106
Fig. 8-105
magicolor 6100 Series Service Manual