MINOLTA-QMS magicolor 6100 Series Service Manual page 198

6.5.3
6.5.4
Page 6-42
Confirmation and Setting of the Total Number of Printouts
The total number of printouts is stored in the RAM. Confirmation and setting of the
total number of printouts can be checked and reset through the operator panel.
6.5.3.1 Purpose
The total number of printouts will be reset when changing the MCTL
PWB or executing the NVRAM INITIAL.
6.5.3.2 Procedure
1. Execute 47 TOTAL PAGE in the Factory Mode.
2. Reset the total number of printouts.
3. Execute 34 TOTAL PAGE to confirm that the desired number of
printouts is now set.
Setting of the Number of Images Per Color
The number of printouts of each color (4 colors) is stored in RAM. Confirmation
and setting of the total number of printouts can be checked and reset through the
operator panel.
6.5.4.1 Purpose
The number of images per color should be reset when changing the
MCTL P.W.B. or executing the NVRAM INITIAL.
6.5.4.2 Procedure
1. Execute 48 EACH IMAGE in the Factory Mode.
2. Reset the number of printouts for each color.
3. Execute 35 EACH IMAGE to confirm that the desired number of
images is now set.
magicolor 6100 Series Service Manual