MINOLTA-QMS magicolor 6100 Series Service Manual page 169

6.4.3
Description of Procedure
1. Turn off the printer. Holding down both scroll
keys (Left and Right) and the MENU Key, turn
on the printer.
2. Press the SELECT key so that the display
changes from screen A) to B).
3. Select "GRID" with the SCROLL keys. Note
that you could select the option of printing a
"STRIPE" here.
4. Press the SELECT key so that the display
changes from screen B) to screen C).
5. Select the color "R" (red) with the SCROLL
keys. Note that you could select the option of
printing yellow, magenta, cyan, black, red,
green, or blue here.
6. Press the SELECT key so that the display
changes from screen C) to screen D). This
screen will only appear when the optional
duplexer is attached.
7. Press the SELECT key so that the display
changes from screen D) to screen E).
8. Press the MEDIA key to stop the test print.
9. Power up the printer to bring it back to normal
printing mode.
magicolor 6100 Series Service Manual
Procedures for Service Mode Operation
6.4.3.1 Test Print
A grid pattern of a single or two colors (R, G, B) and a stripe pattern of
full color can be printed with the test print.
Table 6-4: Test Print Procedure
Message in LCD
SERVICE MODE
A)
TEST PRINT / NEXT
31 GRID PRT
B)
GRID / STRIPE
31 GRID PRT
C)
Y / M / C / K / R / G / B
31 GRID PRT
D)
DUP 1 / 2 / 3 / SIMP
31 GRID PRT YM
E)
F) MEDIA KEY
Page 6-13