MINOLTA-QMS magicolor 6100 Series Service Manual page 199

6.5.5
Code
43 MARGIN ADJUST
43 MARGIN ADJUST
45 LP TUNE UP
45 THV TUNE UP
45 DBV TUNE UP
45 CBV TUNE UP
45 FBV TUNE UP
45 ACV TUNE UP
47 TOTAL PAGE SET
47 LFU PAGE SET
47 DPL PAGE SET
48 EACH IMAGE SET
49 NEXT LIFE SET
magicolor 6100 Series Service Manual
Initial Setting of RAM
Implement the initial setting after the replacement of MCTL P.W.B. and clearing the
contents of RAM.
6.5.5.1 Purpose
Contents of NVRAM must be reset after changing the MCTL P.W.B. or
executing the NVRAM INITIAL.
6.5.5.2 Procedure
1. Prior to replacing the MCTL P.W.B., confirm the contents of
RAM (see Table 6-30).
2. Execute 46 NVRAM INITIAL in the FACTORY MODE.
3. After implementing the NVRAM INITIAL, input the value con-
firmed in step 1 above into RAM to complete the setting.
Table 6-30: Factory Mode
Subject Confirmation Value
Top Margin Set Value
Left Margin Set Value
Adjustment Value ("+4" normally)
Adjustment Value ("0" normally, "-2" for labels)
Adjustment Value ("0" normally)
Adjustment Value ("+1" normally)
Adjustment Value ("0" normally)
Adjustment Value ("0" normally)
Total Print Count
Print Count from LFU
Print Count from Duplex
Formed Image Count of 4 Colors
Print Count for Maintenance Replacement Parts
Page 6-43