MINOLTA-QMS magicolor 6100 Series Service Manual page 43

3.3.3
magicolor 6100 Series Service Manual
6. Gently slide the new belt cartridge
along the guides into the printer.
7. Close the two belt cartridge lock
levers.
8. Close the top door.
9. Close the front door.
Procedures for installation of the toner cartridges
(see Fig. 3-13 to Fig. 3-15)
Holding a toner cartridge vertically will adversely affect the print quality.
1. Open the front door.
2. Holding the toner cartridge hori-
zontally, shake it left and right
three to four times.
3. Remove the tape from around the
protective cover. Remove the pro-
tective cover.
4. Install the toner cartridges in this
order: Cyan (C), Magenta (M), Yel-
low (Y), and Black (K).
5. Push each toner cartridge along the
guides into the printer until you feel
resistance.
6. Close the front door.
Belt Cartridge
Lock Lever
CAUTION
Front Door
Toner Cartridge
Guide
Fig. 3-12
Fig. 3-13
Protective Cover
Fig. 3-14
K
Y
M
C
Fig. 3-15
Page 3-11