MINOLTA-QMS magicolor 6100 Series Service Manual page 306

Bottom Paper Guide
Fig. 7-106
Page 7-106
7.8.6.4 Paper Sensor Low PT4
7.8.6.4.1
7.8.6.4.2
7.8.6.4.3
Tool
Phillips Screwdriver
Disassembly Procedures
(see Fig. 7-106 and Fig. 7-107)
1. Remove the bottom paper guide.
2. Remove the harness cover.
3. Disconnect the CN6 connector from the Relay P.W.B.
4. Remove the Paper Sensor Low from the bottom paper
guide assembly.
Paper Sensor Low PT4
Assembly Procedures
1. Reassemble in reverse order of disassembly.
Bottom Paper Guide
(Botttom View)
Fig. 7-107
magicolor 6100 Series Service Manual