MINOLTA-QMS magicolor 6100 Series Service Manual page 342

17
Look for any paper debris in the transfer unit / paper exit unit.
Is paper debris found in the transfer or paper exit units ?
Check and Reset the PT2 Sensor Lever.
Does the PT2 Sensor Lever operate smoothly?
Check the Harness of the PT2 Sensor and Replace the IOD1 P.W.B.
No
Page 8-28
Message "OUTER JAM" displayed.
No
No
Replace the PT2 Sensor Lever.
Is Error Code 17 cleared ?
No
Is Error Code 17 cleared ?
Yes
Complete
Yes
Yes
Yes
Fig. 8-21
Remove the paper debris.
magicolor 6100 Series Service Manual