MINOLTA-QMS magicolor 6100 Series Service Manual page 175

Step
Select MEDIA MANAGE and the LCD will change as
1
shown in (a) ---> (b)
Select DEFIANCE, and then press the
Select key if the OHP sensor signal should be ignored.
2 The LCD changes as shown in (b) ---> (c)
In the normal operation, the mode is preset to MANAGE.
magicolor 6100 Series Service Manual
6.4.3.7 Media Manage
The signal from the OHP sensor can be ignored at the media select
(OHP). However, this mode should not be used under normal circum-
stances.
Table 6-10: Media Manage Procedure
Description of Procedure Message in LCD
SERVICE MODE
(a)
MEDIA MANAGE
37 MEDIA MANAGE
(b)
MANAGE/DEFIANCE
SERVICE MODE
(c)
DP CHECK
Page 6-19