MINOLTA-QMS magicolor 6100 Series Service Manual page 177

Step
Select the DP CHECK.
1
The LCD changes as shown in (a) ---> (b)
Using the Scroll key, select the desired color, and press
2 Select key.
The LCD changes as shown in (b) ---> (c)
When the yellow toner cartridge is driven and no error
is observed by the toner sensor, "GOOD" will be
displayed on the panel, otherwise, "FAIL".
3 The LCD changes as shown in (c).
Operation of the toner cartridge will be halted
automatically after 60 seconds.
The LCD changes as shown in (c) ---> (d)
Press the Media key to stop the DP CHECK mode.
The LCD changes as shown in (d)
4 Press the Media key one more time to return to the
status of screen (a).
The LCD changes as shown in (d) ---> (e)
magicolor 6100 Series Service Manual
6.4.3.8.1 DP Check
The drive of each toner cartridge can be checked.
Table 6-12: DP Check Procedure
Description of Procedure Message in LCD
39 FACTORY MODE
(a)
DP CHECK
40 DP CHECK
(b)
Y/M/C/K
40 DP CHECK
(c)
GOOD
40 DP CHECK
(d)
Y/M/C/K
FACTORY MODE
(e)
DP CHECK
Y
Page 6-21