MINOLTA-QMS magicolor 6100 Series Service Manual page 52

Page 3-20
3. Attach the hooks (located on each side of the DPU) to the holes of the printer.
Install the duplexer (see Fig. 3-44).
Hole
4. Slowly open the upper unit.
5. Secure the duplexer to the printer with the thumb screws (see Fig. 3-46).
Thumbscrews
6. Close the upper unit.
7. Connect the interface connectors between the DPU and the printer
(see Fig. 3-47 and Fig. 3-48).
Fig. 3-47
Hook
Fig. 3-45
Fig. 3-46
Connector Cable
magicolor 6100 Series Service Manual
Fig. 3-48