MINOLTA-QMS magicolor 6100 Series Service Manual page 279

7.6.10 Toner Drive Assembly
Toner Drive Assembly
magicolor 6100 Series Service Manual
7.6.10.1 Tools
Phillips Screwdrivers #1 and #2
Slotted Screwdriver
7.6.10.2 Disassembly Procedures
(see Fig. 7-71)
1. Remove the toner cartridges.
2. Remove the belt cartridge.
3. Remove the right side cover (see section 7.1.2).
4. Remove the ozone duct assembly (see section 7.3.8).
5. Remove the main gear unit (see section 7.3.2).
6. Remove one set screw (ST3x6) from the toner drive assembly.
7. Pull out the toner drive assembly toward you.
7.6.10.3 Assembly Procedures
1. Install the toner drive assembly to the engine frame.
2. Reassemble in reverse order of disassembly.
Fig. 7-71
Ozone Duct Assembly
Main Gear Unit
Page 7-79