MINOLTA-QMS magicolor 6100 Series Service Manual page 272

7.6.4
Paper Feed Roller
Separator Pad
Page 7-72
Paper Feed Roller / Separator Pad
7.6.4.1 Tool
#1 Phillips Screwdriver
7.6.4.2 Disassembly Procedures
(see Fig. 7-65)
1. Remove the paper feeding cassette.
2. Remove the transfer unit (see section 7.6.1).
3. Remove two set screws (ST3x6) from the left paper guide.
4. Remove the left paper guide.
5. Remove two set screws (ST3x6) from the upper-left paper guide.
6. Remove the upper-left paper guide.
7. Disconnect all the harness connectors from the OHP sensor and paper
sensor.
8. Sliding the paper feeding roller to the right side, remove it from the
shaft.
9. Pull up the separator pad and remove it.
Band
Do not touch the surface of the new paper feed roller and
separator pad.
7.6.4.3 Assembly Procedures
1. Reassemble in reverse order of disassembly.
Transfer Unit
Paper Guide(UL)
Fig. 7-65
CAUTION:
magicolor 6100 Series Service Manual