MINOLTA-QMS magicolor 6100 Series Service Manual page 224

7.2.3
Page 7-24
IOD2 P.W.B.
7.2.3.1 Tools
Phillips Screwdrivers #1 and #2
When handling any P.W.B. use ESD precautions.
7.2.3.2 Disassembly Procedures
(see Fig. 7-24)
1. Remove the right side cover (see section 7.1.2).
2. Remove 16 harnesses connected to the IOD2 P.W.B.
3. Remove one fixing screw (ST3x6) from the IOD2 P.W.B with base.
4. Remove the IOD2 P.W.B from the engine. The IOD2 P.W.B is fixed
by hooks at 3 locations.
7.2.3.3 Assembly Procedures
1. Reinstall in reverse order of disassembly.
2. Connect the power supply cable.
3. Turn on the power supply switch of printer.
4. Run the test print in the service mode.
5. Confirm the printer operation and print quality.
CAUTION:
magicolor 6100 Series Service Manual