MINOLTA-QMS magicolor 6100 Series Service Manual page 236

7.3.2
Page 7-36
Main Gear Unit
7.3.2.1 Tools
Phillips Screwdrivers #1 and #2
Small Screwdriver
7.3.2.2 Disassembly Procedures
(see Fig. 7-32)
1. Remove the fuser.
2. Remove the main motor assembly (see section 7.3.1).
3. Remove the right base cover (see section 7.1.10).
4. Remove the IOD2 P.W.B. (see section 7.2.3).
5. Remove the ozone fan duct assembly (see section 7.3.8).
6. Remove four set screws (ST3x6) from the main drive unit.
7. Remove the main gear unit from the frame.
7.3.2.3 Assembly Procedures
1. Install the main drive unit on the engine frame.
2. Reassemble in reverse order of disassembly.
magicolor 6100 Series Service Manual