MINOLTA-QMS magicolor 6100 Series Service Manual page 313

7.9.6
magicolor 6100 Series Service Manual
IOD3 P.W.B. Assembly
7.9.6.1 Tool
#1 Phillips Screwdriver
7.9.6.2 Disassembly Procedures
(see Fig. 7-114)
1. Remove the LFU from the printer.
2. Remove the left base cover (see section 7.9.3[6]).
3. Disconnect five connectors from the IOD3 P.W.B. assembly.
4. Remove the IOD3 P.W.B. Assembly by removing four set screws
(ST3x6).
IOD3 PWB Assembly
7.9.6.3 Assembly Procedures
1. Reassemble in reverse order of disassembly.
Fig. 7-114
Page 7-113