MINOLTA-QMS magicolor 6100 Series Service Manual page 215

7.1.10 Right Base Cover
When assembling the base cover, insert the leading edge of right base cover into the two
hooks located at the bottom (left and right) of the base plate (see Fig. 7-15).
Join the projecting part of right base cover
meet the 3 hole locations in the base plate
bottom (see Fig. 7-15).
magicolor 6100 Series Service Manual
7.1.10.1 Tools
#2 Phillips Screwdriver
7.1.10.2 Disassembly Procedures
(see Fig. 7-14)
1. Remove the right side cover (see section 7.1.2).
2. Remove two screws (BT4x10) from the right base cover.
3. Remove the right base cover from front to back.
7.1.10.3 Assembly Procedures
1. Reinstall the new right base cover in reverse order of disassembly.
Right Base Cover
Fig. 7-14
CAUTION:
Projecting Part
Base Plate
Hole
Hook
Fig. 7-15
Right Base
Cover
Page 7-15