Page 7-104
7.8.6.2
Interlock Switches (3 and 4)
Switch 3: Interlock switch used to sense an open top-rear door.
Switch 4: Interlock switch used to sense an open lower-rear door.
7.8.6.2.1
7.8.6.2.2
Switch 3
Switch 4
7.8.6.2.3
Tool
Phillips Screwdriver
Disassembly Procedures
(see Fig. 7-104)
1. Remove the lower-right cover (see section 7.8.1.1).
2. Remove one set screw (ST3x12) from the appropriate
interlock switch.
3. Remove the harness connector from the appropriate
interlock switch.
Fig. 7-104
Assembly Procedures
1. Connect the harness connector.
2. Attach the appropriate interlock switch to the frame.
3. Reassemble in reverse order of disassembly.
magicolor 6100 Series Service Manual