MINOLTA-QMS magicolor 6100 Series Service Manual page 267

7.5.15 Paper Full Sensor PFUS
Paper Full Sensor
Harness Cover
Paper Exit Frame
magicolor 6100 Series Service Manual
7.5.15.1 Tools
Phillips Screwdrivers #1 and #2
7.5.15.2 Disassembly Procedures
(see Fig. 7-60)
1. Remove the paper exit unit (see section 7.6.6).
2. Remove the harness cover.
3. Remove the paper exit unit cover (see section 7.1.6).
4. Disconnect the harness connector connected from the paper exit sen-
sor.
5. Remove the paper full sensor. Unhook the installation base, and
remove the switch.
7.5.15.3 Assembly Procedures
6. Reassemble in reverse order of disassembly.
Fig. 7-60
Page 7-67