MINOLTA-QMS magicolor 6100 Series Service Manual page 252

7.5.1
Page 7-52
Interlock Switch (Front Door)
7.5.1.1 Tools
Phillips Screwdrivers #1 and #2
7.5.1.2 Disassembly Procedures
(see Fig. 7-46)
1. Remove the controller case A assembly (see section 7.2.5.2[13]).
2. Disconnect the connector from the switch.
3. Remove the switch from the switch base.
7.5.1.3 Assembly Procedures
1. Install the new switch onto the switch base.
2. Reassemble in reverse order of disassembly.
Switch Base
Interlock Switch
Fig. 7-46
magicolor 6100 Series Service Manual