MINOLTA-QMS magicolor 6100 Series Service Manual page 301

7.8.5
magicolor 6100 Series Service Manual
Replacement of Solenoid Assemblies
7.8.5.1 Upper Solenoid Assembly
7.8.5.1.1
7.8.5.1.2
7.8.5.1.3
Tools
Phillips Screwdrivers #1 and #2
Disassembly Procedures
(see Fig. 7-101)
1. Remove the top-right cover (section 7.8.1.3)
2. Remove the lower-right cover (section 7.8.1.1)
3. Disconnect the solenoid harness connector.
4. Remove the harness from the clamp.
5. Remove two set screws (ST3x6) from the upper solenoid
assembly.
Upper Solenoid
Fig. 7-101
Assembly Procedures
1. Reassemble in reverse order of disassembly.
Assembly
Page 7-101