MINOLTA-QMS magicolor 6100 Series Service Manual page 295

7.8.2
Fig. 7-91
magicolor 6100 Series Service Manual
Separation of the Top and Lower Units
7.8.2.1 Tools
Phillips Screwdrivers #1 and #2
7.8.2.2 Disassembly Procedures
(see Fig. 7-91 to Fig. 7-92)
1. Remove lower-right and lower-left covers (see section 7.8.1.1 and
section 7.8.1.2).
2. Remove the solenoid connector, and remove the harness from the
clamp.
3. Remove the fan connector, and remove the harness from the clamp.
4. Remove one set screw (M4x) support pin from both sides.
5. Separate the top unit from the lower unit.
D-Shaped
Hole
7.8.2.3 Assembly Procedures
1. Reassemble in reverse order of disassembly.
Top Unit
Fig. 7-92
Lower Unit
Page 7-95