7.3.3
Page 7-38
Developer Motor (DM)
7.3.3.1
Tools
#1 Phillips Screwdriver
Small Screwdriver
7.3.3.2
Disassembly Procedures
(see Fig. 7-33)
1. Remove the toner cartridge.
2. Remove the top cover.
3. Disconnect one connector (CN1) from the developer motor P.W.B.
4. Remove four fixing screws (ST3x6) from the developing motor.
5. Remove the developing motor from the developer driving unit.
7.3.3.3
Assembly Procedures
1. Reassemble in reverse order of disassembly.
magicolor 6100 Series Service Manual