MINOLTA-QMS magicolor 6100 Series Service Manual page 72

Page 1-16
4.2.3.4.2 Process of First Transfer
(see Fig. 4-18)
The OPC belt comes in contact with the transfer drum, and
rotates synchronously with the transfer drum. The OPC belt
is biased to the potential of -CBV. The potential of the trans-
fer drum is near ground.
The toner on the OPC belt is moved to the transfer drum due
to the difference of potential between the OPC belt and the
transfer drum. Each color toner is developed and transferred
onto the transfer drum. Two toner images are overlapped on
the transfer drum.
After the drum transfer process is complete, the toner images
are transferred onto the paper.
OPC Belt
DrumTransferring
Fig. 4-18
Residual Charge
Residual Toner
Belt
Belt
Cleaning
(Brade)
Discharging
(Erase Lamp)
magicolor 6100 Series Service Manual