MINOLTA-QMS magicolor 6100 Series Service Manual page 341

17
Look for any paper debris in the paper feeding and transfer areas.
Is there paper debris within the transfer unit.
Is the transfer unit properly closing ?
Check the Harness of the PT1 Sensor Lever, and Replace the IOD1 P.W.B.
No
magicolor 6100 Series Service Manual
Message "INNER JAM" displayed.
No
Inspect the transfer unit.
Yes
Is the PT1 Sensor Lever undone ?
No
Replace the PT1 Sensor Lever.
Is Error Code 17 cleared ?
No
Is Error Code 17 cleared ?
Yes
Complete
Yes
No
Open and close the transfer door.
Yes
Yes
Fig. 8-20
Remove the paper debris.
Reset the PT1 Sensor Lever.
Page 8-27