Updating System Software; Downloading Methods; System File - MINOLTA-QMS 2200 User Manual

This item needs
cleaning...
Duplex unit paper guides
or rollers
Laser lens cover
Paper exit rollers
Printer exterior
Printer interior

Updating System Software

The system software in your magicolor 2200 DeskLaser is stored in flash ROM, read-only
memory that can be erased and rewritten to "in a flash." This allows you to update the
system software through the printer interface without opening up the printer and installing
new PROMs. The system software is updated by sending a specified file to the printer.

Downloading Methods

You can use Ethernet TCP/IP or a parallel connection to download the system file to the
printer.
Download Method
Ethernet TCP/IP
Parallel

System File

To perform an update you need to download a system file to your printer. The system file
filename identifies the system version number and ends with an .img filename extension.
The printer must remain inactive during the download process.
Updating System Software
After...
Every 30,000 single-sided pages, or 12
months, whichever comes earlier.
Removing the waste toner pack to clean
around it or to replace it.
Every 30,000 single-sided pages, or 12
months, whichever comes earlier.
As needed.
Every 30,000 single-sided pages, or 12
months, whichever comes earlier.
See
"Downloading the System File via Ethernet (TCP/IP)" on page 84.
"Downloading the System File via Parallel" on page 87.
See...
Maintenance Guide.
83