Coach Final Record; Safety Certification; Dot Certification Label; Fuel Tank Label - PREVOST H3-41 Maintenance Manual

FIGURE 6: I-BEAM AXLE DATA PLATE

3.1.5 Coach Final Record

The Coach Final Record is a record of all data
pertaining to the assembly of the vehicle. This
record is given to the new customer on the
vehicle delivery. Retain this record in the
company records office for reference and safe-
keeping.

3.1.6 Safety Certification

Vehicle components meet specifications and
standards as follows:
- Material and parts conform to ASTM and/or
SAE standards in effect at the time of
manufacture.
- All factory-installed interior materials meet
FMVSS 302 for fire resistance.
- Certified according to Provincial, State and
Federal Safety standards (Canadian and US)
BMCSS, FMVSS, and CMVSS.
Other applicable certification labels are affixed to
the component.

3.1.7 DOT Certification Label

This certifies that vehicles manufactured by
Prevost Car Inc., comply with all Federal Motor
Vehicle Safety Standards at the time of
manufacture. Information such as date of
manufacture, model year, gross vehicle weight
rating, tire types and inflation pressure is also
etched on this plate. The DOT Certification plate
is affixed behind the driver's seat.
FIGURE 7: DOT CERTIFICATION PLATE

3.1.8 Fuel Tank Label

The fuel tank label is molded on the side of the
fuel tank. To read this label, unscrew the fuel
tank access panel nuts located at the left in the
condenser compartment.

3.1.9 EPA Engine Label

The exhaust emission certification label affixed
in the engine compartment certifies that the
engine conforms to federal and any state
exhaust emission regulations (Figure 8). It gives
the operating conditions under which certification
was made.
FIGURE 8: EMISSION CONTROL LABEL

3.1.10 Vehicle Identification Number (VIN)

The seventeen digit vehicle identification number
(VIN) is located on a plate (Figure 9) located on
the windshield frame pillar (driver's side). The
VIN is visible from the outside of the vehicle.
Make sure the correct vehicle identification
number is given when ordering replacement
parts. Using the VIN when ordering parts will
facilitate processing.
PA1621 Maintenance Manual All Series | Section 00 revised Sept 2019
SECTION 00 : GENERAL INFORMATION
00016
23229
5