Instruction Allocation - YASKAWA NX100 Instructions Manual

8.15 Numeric Key Customize Function

Instruction Allocation

Set this function in the KEY ALLOCATION (EACH) window.
Operation
1 Move the cursor to "FUNC-
TION" of the key to be allo-
cated and press [SELECT].
2 Select "INSTRUCTION".
(Continued on the next page.)
A selection list appears.
DATA EDIT
KEY ALLOCATION(EACH)
APPLI. NO. : 1
KEY FUNCTION
MAKER
MAKER
INSTRUCTION
.
MAKER
JOB CALL
0 MAKER
DISPLAY
1 MAKER
2 MAKER
3 MAKER
4 MAKER
5 MAKER
6 MAKER
7 MAKER
8 MAKER
9 MAKER
Main Menu Short Cut
The instruction is shown in the "ALLOCATION CONTENT".
DATA EDIT
KEY ALLOCATION(EACH)
APPLI. NO. : 1
KEY FUNCTION
MAKER
.
MAKER
0 MAKER
1 MAKER
2 MAKER
3 MAKER
4 MAKER
5 MAKER
6 MAKER
7 MAKER
8 MAKER
9 MAKER
Main Menu Short Cut
To change the instruction, move the cursor to the instruction and
press [SELECT]. Then the instruction group list appears. Select
the group which contains the instruction to modify.
DATA EDIT
KEY ALLOCATION(EACH)
APPLI. NO. : 1
KEY FUNCTION
INSTRUCTION
.
MAKER
0 MAKER
1 MAKER
2 MAKER
3 MAKER
4 MAKER
5 MAKER
6 MAKER
7 MAKER
8 MAKER
9 MAKER
Main Menu Short Cut
When the instruction list dialog box is shown, select the instruc-
tion to be changed.
8-90
Explanation
DISPLAY UTILITY
ALLOCATION CONTENT
PAGE
DISPLAY UTILITY
ALLOCATION CONTENT
DOUT
PAGE
DISPLAY UTILITY
ALLOCATION CONTENT
DOUT DOUT
PAGE
IN/OUT
CONTROL
DEVICE
MOTION
ARITH
SHIFT
OTHER