YASKAWA NX100 Instructions Manual page 181

To set the button size in the button size setting dialog box, follow the procedure below.
In the explanation of the operation procedure, the expression "Select ..." means that the
SUPPLE
cursor is moved to the object item and the SELECT key is pressed, or that the item is
-MENT
directly selected by touching the screen.
Operation
1 Specify the area to set the but-
ton size.
Select the desired area from
the area setting buttons.
2 Specify the font style.
The {Bold Type} check box
can be checked or unchecked
alternately each time the
check box is selected.
3 Specify the button size.
Select a button from the three
buttons in the dialog box.
The buttons in the selected area is subject to size setting.
Note that only the last-selected button determines the area sub-
ject to size setting, even if settings are performed several times
before then.
NxPp
Please select button size.
Main Menu
Bold Type
Check the {Bold Type} check box as follows to set the font to the
bold style.
NxPp
Please select button size.
Main Menu
Bold Type
Clear the {Bold Type} check box as follows to set the font to the
regular style.
NxPp
Please select button size.
Main Menu
Bold Type
JOB EDIT
FD/CF
JOB
DOUT
MOVE
CF
END
SETUP
ARC WELDING
NxPp
Please select button size.
DISPLAY SETUP
VARIABLE
B001
A a
Main Menu
IN/OUT
In Out
Bold Type
ROBOT
SYSTEM INFO
Main Menu Short Cut
8-115
8.19 Display Setting Function
Explanation
Cancel
Pulldown Menu Inst List
ABCDE ABCDE
ABCDE
Cancel
Pulldown Menu Inst List
ABCDE
ABCDE ABCDE
Cancel
Pulldown Menu Inst List
ABCDE
ABCDE ABCDE
DISPLAY UTILITY
JOB CONTENT: MASTER
JOB NAME: 1 STEP NO: 000
CONTROL GROUP: R1 TOOL:
0000 NOP
0001 MOVJ VJ=0.78
0002 MOVJ VJ=0.78
0003 MOVJ VJ=0.78 Cancel
0004 MOVJ VJ=0.78
Pulldown Menu Inst List
0005 MOVJ VJ=0.78
0006 MOVJ VJ=0.78
0007 MOVJ VJ=0.78
ABCDE
ABCDE ABCDE
0008 MOVJ VJ=0.78
0009 MOVJ VJ=0.78
0010 MOVJ VJ=0.78
0011 MOVJ VJ=0.78
0012 MOVJ VJ=0.78
=> MOVJ VJ=0.78
Turn on servo power