YASKAWA NX100 Instructions Manual page 223

Operation
3 Modify the settings.
4 Press [ENTER] in the MOTOR
SPEC window.
After the setting, the current window moves to the window for the
next axis setting. Complete the settings for all axes in the same
manner.
When [ENTER] is pressed in the MOTOR SPEC window for the
last axis, the setting in the MOTOR SPEC window is completed
and the confirmation dialog box appears.
CONTROL GROUP
R1 : EA1400N-A0
B1 : RECT-XYZ
R2 : HP20-A0
B2 : NONE
R3
: NONE
S1 : TURN-1
S2 : TURN-1
S3 : NONE
Main Menu Short Cut
If {YES} is selected, the system parameter is set automatically.
11-15
11.2 Addition of Base and Station Axes
Explanation
M o d i f y ?
YES NO
Maintenance mode