Initial Diagnosis - YASKAWA NX100 Instructions Manual

5.1 Turning ON the Main Power Supply
5.1.1

Initial Diagnosis

The initial diagnosis are performed in the NX100 when main power is turned ON, and the star-
tup window is shown on the programming pendant screen.
5.1.2
When Initial Diagnosis are Complete
When the power supply is turned OFF, the NX100 saves all condition data, including:
• Mode of operation
• Called job (active job if the NX100 is in the play mode; edit job if the NX100 is in the teach
mode) and the cursor position in the job.
Startup Window
JOB FD/CF
DOUT
MOVE
CF
END
ARC WELDING SETUP
VARIABLE DISPLAY SETUP
B001
A a
IN/OUT
In Out
ROBOT
SYSTEM INFO
=>
GETTOOL P000 TL#(0)
Turn on servo power
Main Menu Short Cut
Initial Window
5-2