Initializing I/O Data - YASKAWA NX100 Instructions Manual

8.18.4

Initializing I/O Data

Operation
1 Turn ON the power supply
again while pressing [MAIN
MENU] simultaneously.
2 Change the security mode to
the management mode.
3 Select {FILE} under the main
menu.
4 Select {INITIALIZE}.
5 Select {I/O DATA}.
6 Select data to be initialized.
7 Press [ENTER].
8 Select {YES}.
The I/O data selection window appears.
INITIALIZE
C.IO PRGM
IO NAME DATA
SIMULATED IN DATA
EXTERNAL IO NAME DATA
REGISTER NAME DATA
Main Menu Short Cut
The selected data is marked with " ".
The I/O data marked with " " cannot be selected.
INITIALIZE
C.IO PRGM
IO NAME DATA
SIMULATED IN DATA
EXTERNAL IO NAME DATA
REGISTER NAME DATA
A confirmation dialog box appears.
INITIALIZE
C.IO PRGM
IO NAME DATA
SIMULATED IN DATA
EXTERNAL IO NAME DATA
REGISTER NAME DATA
Main Menu Short Cut
The selected data is initialized.
8-107
8.18 File Initialize
Explanation
CIOPRG . LST
IONAME . DAT
PSEUDOIN . DAT
EXIONAME . DAT
IOMNAME . DAT
Maintenance mode
CIOPRG . LST
IONAME . DAT
PSEUDOIN . DAT
EXIONAME . DAT
IOMNAME . DAT
CIOPRG . LST
IONAME . DAT
PSEUDOIN . DAT
EXIONAME . DAT
IOMNAME . DAT
I n i t i a l i z e ?
YES NO
Maintenance mode