YASKAWA NX100 Instructions Manual page 302

13.6 User I/O Signal Assignment
Logical
Output Name / Function
Number
30057 TIP REPLACE REQUEST
This signal is output when the stored number
of welding reaches the number of welding set
for the tip replacement.
*1
This signal is not output during operation.
*2
The work home position cube and Cube 32 are same.
*3
This signal can be allocated to any user I/O signal at the I/O allocation display in oper-
ation condition.
*4
This signal can be select "USE" or "NOT USE" by pseudo input signal "8202x". If "NOT
USE" is selected, this signal can be used as the user I/O signal described in parenthe-
ses.
Pseudo Input
Signal 8202x
System Output List NIO01 (Spot Welding)
7 6 5 4 3 2 1 0
0 0 0 1 1 1 1 1
Timer Cooling Water Error Validating (or IN09)
Gun Cooling Water Error Validating (or IN10)
Transthermo Error Validating (or IN11)
Low Air Pressure Validating (or IN12)
Weld ON/OFF Validating (or OUT09)
13-63
Logical
Output Name / Function
Number