YASKAWA NX100 Instructions Manual page 169

Set the parameters in the following manner.
Operation
1 Select the parameter data to
be set.
2 Enter the value.
3 Press [ENTER].
Move the cursor to the parameter number data (decimal or
binary) in the PARAMETER window, and press [SELECT].
- To enter a decimal setting, select the decimal figure.
- To enter a binary setting, select the binary figure.
DATA EDIT
PARAMETER
S2C055
S2C056
S2C057
S2C058
S2C059
S2C060
S2C061
S2C062
S2C063
S2C064
S2C065
S2C066
Main Menu ShortCut
If a decimal figure is selected, enter a decimal value with the
numeric keys.
S2C058
If a binary figure is selected, move the cursor to the binary figure
data in the input buffer line, and press [SELECT]. Each time
[SELECT] is pressed, "0" and "1" alternate in the window. "0" or
"1" can also be entered with the numeric keys.
S2C058
The new setting appears in the position where the cursor is
located.
EDIT
DATA
PARAMETER
S2C055
S2C056
S2C057
S2C058
S2C059
S2C060
S2C061
S2C062
S2C063
S2C064
S2C065
S2C066
Main Menu ShortCut
8-103
8.17 Changing the Parameter Setting
Explanation
DISPLAY UTILITY
64 0100_0000
65 0100_0001
66 0100_0010
0 0000_0000
0 0000_0000
0 0000_0000
0 0000_0000
0 0000_0000
0 0000_0000
0 0000_0000
0 0000_0000
0 0000_0000
0010_0000
32
DISPLAY UTILITY
128 0100_0000
256 0100_0001
512 0100_0010
32 0010_0000
0 0000_0000
0 0000_0000
0 0000_0000
0 0000_0000
0 0000_0000
0 0000_0000
0 0000_0000
0 0000_0000