YASKAWA NX100 Instructions Manual page 192

9.2 Backup by CMOS.BIN
Operation
6 Select {CMOS LOAD}.
7 Select {YES}.
8 Wait for the loading to be com-
pleted.
The confirmation dialog box appears.
CompactFlash
SYSTEM INFO
CMOS SAVE
FILE
CMOS LOAD
SYSTEM RESTORE
TOOL
CF
DISPLAY SETUP
Aa
Short Cut
Main Menu
The loaded CMOS.BIN file contents are reflected in the data in
the robot I/F unit and the CompactFlash of NCP01.
While loading, the message "Loading system data. Don't turn the
power off." is displayed.
When the buzzer on the programming pendant sounds and the
message disappears, the load is completed.
Depending on the version of software, the above-
mentioned message is not displayed. In this
NOTE
case, confirm that the load is completed by the
buzzer sound of programming pendant.
If it is impossible to confirm by the buzzer, move
the cursor up/down. The cursor does not move
while loading is in progress.
9-7
Explanation
Load?
YES
NO
Maintenance mode