YASKAWA NX100 Instructions Manual page 215

Operation
5 Select {CONTROL GROUP}.
6 Point the cursor to the type of
control group to be modified,
and press [SELECT].
7 Select one in the type list.
8 Press [ENTER] in CONTROL
GROUP window.
The current control group type is displayed.
CONTROL GROUP
R1 : EA1400N-A0
B1 : NONE
R2 : HP20-A0
B2 : NONE
R3 : NONE
S1 : TURN-1
S2 : TURN-1
S3 : NONE
Main Menu Short Cut
The MACHINE LIST window is displayed.
MACHINE LIST
NONE RECT-X
RECT-XYZ RECT-XZ
RECT-YZ RECT-Z
Main Menu Short Cut
RECT-X
RECT-Y
RECT-Z
RECT-XY
RECT-YZ
RECT-XYZ
(See the figures on the following page.)
After the type selection, the window returns to the CONTROL
GROUP window.
The window moves to the CONNECTION window.
11-7
11.2 Addition of Base and Station Axes
Explanation
Maintenance mode
RECT-XY
RECT-Y
Maintenance mode
: TRAVEL X-AXIS BASE
: TRAVEL Y-AXIS BASE
: TRAVEL Z-AXIS BASE
: TRAVEL XY-AXIS BASE
: TRAVEL YZ-AXIS BASE
: TRAVEL XYZ-AXIS BASE