YASKAWA NX100 Instructions Manual page 44

4.3 Connection Methods
(2) Rotate the main power supply switch to the "OFF" position and open the door gen-
tly.
2. Confirm that the primary power supply is OFF.
3. Make a hole in the plate and run the primary power supply cable through it. It is located
on the top or on the left side of the NX100.
Attach the plate and cable firmly so that it won't shift or slide out of place.
(1) Pull off the primary cover of the switch which is on the upper left side of the NX100.
NX100
Rotating the main power supply switch to the OFF position.
Pulling Off the Cover
Main power supply switch
4-7