YASKAWA NX100 Instructions Manual page 190

9.2 Backup by CMOS.BIN
Operation
5 Select {CMOS SAVE}.
6 Select {YES}.
7 Wait for the saving to be com-
pleted.
The confirmation dialog box appears.
CompactFlash
SYSTEM INFO
CMOS SAVE
FILE
CMOS LOAD
SYSTEM RESTORE
TOOL
CF
DISPLAY SETUP
Aa
Main Menu Short Cut
Select {YES} to save the CMOS data into the CompactFlash.
When saving the file, if the CMOS.BIN file already exists in the
CompactFlash, the following confirmation dialog box appears.
Select {YES} to overwrite the CMOS.BIN file in the Compact-
Flash.
CompactFlash
SYSTEM INFO
CMOS SAVE
FILE
CMOS LOAD
SYSTEM RESTORE
TOOL
CF
DISPLAY SETUP
Aa
Main Menu Short Cut
While saving, the message "Saving system data. Don't turn the
power off." is displayed.
When the buzzer on the programming pendant sounds and the
message disappears, the save is completed.
Depending on the version of software, the above-
mentioned message is not displayed. In this
NOTE
case, confirm that the save is completed by the
buzzer sound of programming pendant.
If it is impossible to confirm by the buzzer, move
the cursor up/down. The cursor does not move
while saving is in progress.
9-5
Explanation
Save?
YES NO
Maintenance mode
Overwrite file?
CMOS. BIN
YES
NO
Maintenance mode