Update Modem Firmware By Using A Local Firmware File - Digi TX54 User Manual

System administration
l
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Update modem firmware by using a local firmware file

You can update your modem firmware by uploading a modem firmware file to your TX54 device.
Firmware should be uploaded to /opt/MODEM_MODEL/Custom_Firmware, for example,
/opt/LM940/Custom_Firmware. Modem firmware can be downloaded from Digi at
https://ftp1.digi.com/support/firmware/dal/carrier_firmware/. See
information about uploading files to the TX54 device.
TX54 User Guide
-----------------------------
Successfully updated firmware
Modem firmware update complete
>
For dual-cellular variants, use either the name or the imei parameter to update the
modem firmware:
a. To determine the name and IMEI of the appropriate modem:
> modem firmwware ota update version
Multiple modems available.
Please run the command with the modem identifier arguments
"name" or "imei"
to select a modem.
Available modems:
wwan2 (IMEI: 73342482496112) - Telit LM940
wwan1 (IMEI: 83152092446664) - Telit LM940
>
b. Use the name or imei parameter to update the modem firmware, and use the
version parameter to identify the appropriate firmware version as determined
using the modem firmware check or modem firmware list command. For
example:
> modem firmware ota update name wwan1 version 24.01.5x4_ATT
Updating modem firmware ...
-----------------------------
Successfully updated firmware
Modem firmware update complete
>
Update cellular module firmware
Use the scp command for
825