Table of Contents
Advertisement
System administration
Retrieving download location for modem firmware '24.01.5x4_ATT' ...
Downloading modem firmware '24.01.5x4_ATT' to '/opt/LE910C4_
NF/Custom_Firmware' ...
Modem firmware '24.01.5x4_ATT' downloaded
Updating modem firmware ...
Programming modem firmware ...
Found modem ...
Validate modem firmware ...
Getting ready for update ...
Stopping services ...
Running update pass 1 of 3 ...
Restarting services ...
-----------------------------
Successfully updated firmware
Modem firmware update complete
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Update modem firmware by using a local firmware file
You can update your modem firmware by uploading a modem firmware file to your IX20 device.
Firmware should be uploaded to /opt/MODEM_MODEL/Custom_Firmware, for example,
/opt/LM940/Custom_Firmware. Modem firmware can be downloaded from Digi at
https://ftp1.digi.com/support/firmware/dal/carrier_firmware/. See
information about uploading files to the IX20 device.
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the modem firmware check command to determine if new modem firmware is available
on local device.
> modem firmware check
Checking for latest ATT firmware in flash ...
Newest firmware version available in flash is '05.05.58.00_ATT_005.026_
000'
Modem firmware up to date
05.05.58.00_ATT_005.026_000
> modem firmware check
3. Use the modem firmware list command to list available firmware on the IX20 device.
>
modem firmware list
IX20 User Guide
Update cellular module firmware
Use the scp command
for
697
Advertisement
Table of Contents
