Configure System Information - Digi Connect IT 16 User Manual

System administration
1. Log into the Connect IT 16/48 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
2. Enter show system verbose at the prompt:
> show system verbose
(541317s)
>

Configure system information

You can configure information related to your Connect IT 16/48 device, such as providing a name and
location for the device.
Configuration items
A name for the device.
n
The name of a contact for the device.
n
The location of the device.
n
A description of the device.
n
A banner that will be displayed when users access terminal services on the device.
n
Digi Connect IT® 16/48 User Guide
Model
Serial Number
SKU
Hostname
MAC
Hardware Version
Firmware Version
Alt. Firmware Version
Bootloader Version
Schema Version
Timezone
Current Time
CPU
Uptime
Temperature
Disk
----
Load Average
RAM Usage
Disk /etc/config Usage
Disk /opt Usage
Disk /overlay Usage
Disk /tmp Usage
Disk /var Usage
Configure system information
: Digi Connect IT 16/48
: Connect IT 16/48-000065
: Connect IT 16/48
: Connect IT 16/48
: DF:DD:E2:AE:21:18
: 50001947-01 1P
: 21.2.39.67
: 21.2.39.67
: 19.7.23.0-15f936e0ed
: 715
: UTC
: Fri, 26 Feb 2021 8:04:23 +0000
: 1.4%
: 6 days, 6 hours, 21 minutes, 57 seconds
: 40C
: 0.09, 0.10, 0.08
: 127.843MB/1880.421MB(6%)
: 18.421MB/4546.371MB(0%)
: -4523.-46MB/549.304MB(-822%)
: MB/MB(%)
: 0.007MB/256.0MB(0%)
: 1.765MB/256.0MB(1%)
587