Setting Mirror - GRAPHTEC CE7000 Series User Manual

Setting mirror

There is a function to mirror the cutting by reversing the origin point and coordinate axes.
Set the MIRROR setting to ON to do mirroring.
Reference
This setting will be saved even if the power is shut off.
MIRROR mode ON
MIRROR mode OFF
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [3] key (AREA).
AREA PARAMETERS screen (1/2) is displayed.
3
Press the [3] key (MIRROR).
MIRROR screen is displayed.
Supplement
Perform the settings in Normal mode.
4-7