GRAPHTEC CE7000 Series User Manual page 115

4
Press the [1] key (ON) or the [2] key (OFF).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to AREA PARAMETERS
screen (1/2).
6
Press the [PAUSE/MENU] key.
The tool carriage moves to the coordinate position you set.
It will return to default screen.
Supplement
It will return to AREA PARAMETERS screen (1/2)
without changing the settings when you press
the [ESC] key (CANCEL).
3-11