Special Precautions On Handling Blades; Cutter Blades; Cutter Plungers; After Mounting The Cutter Plungers - GRAPHTEC CE7000 Series User Manual

Cutting plotter
Table of Contents

Advertisement

Special Precautions on Handling Blades

Sharp cutter blades are used with this plotter. Handle the cutter blades and holders with care to prevent bodily
injury.

Cutter Blades

Cutter blades are very sharp. While handling a cutter blade or cutter pen, be careful to avoid cutting your fingers
or other parts of your body. Promptly return used blades to the cutter case provided.
For the used blade, put it in the supplied cutter blade case and discard them in accordance with the local
regulations.

Cutter plungers

The tip consists of a sharp blade. Be sure not to extend it too far. Moreover, when you are not using the cutter
plungers, make sure that the blade is fully retracted.

After Mounting the Cutter Plungers

After the power has been turned on, and during operation, do not touch the pen tip. It is dangerous.
Blade tip
Cutter blade
III

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ce7000-40Ce7000-60Ce7000-130Ce7000-160Ce7000-60e

Table of Contents