GRAPHTEC CE7000 Series User Manual page 244

5
Press the [1] key (USB DRIVE).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to DATA LINK screen.
7
Press the [2] key (SELECTS DATA FILE).
SELECTS DATA FILE screen is displayed.
8
Press the POSITION (
9
Press the [ENTER] key (START).
Cutting starts with the selected file.
10
When the cutting is finished, it will become READY status.
) keys to select the file.
12-4
Supplement
•
If the USB memory is not inserted, the
following is displayed.
•
If there is no data in the USB memory, the
following screen is displayed.
Supplement
Press the POSITION ( ) keys to change the
folder.