GRAPHTEC CE7000 Series User Manual page 319

6
Confirm that the pen tool is set.
7
Confirm that operation area of tool and media is safe.
8
Press the [1] key (DONE).
Plotting of the test pattern starts.
9
Turn the power off to stop the printing.
Do not place your hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
Supplement
t will return to TEST screen without printing by
pressing the [ESC] key (CANCEL SELF TEST).
Supplement
It will keep on printing until the power is turned
off once the printing is started by pressing the [1]
key (DONE).
15-19
CAUTION