Gp-Gl Step Size (Simple Mode) - GRAPHTEC CE7000 Series User Manual

2.12.3 GP-GL Step Size (Simple mode)

Here you can change the distance of 1 Step. Match it to the software you are using.
"Command setting" is only for GP-GL commands.
Operation
1
In default screen, press [PAUSE/MENU] key.
MENU screen is displayed.
2
Press [2] key (I/F) .
INTERFACE screen is displayed.
3
Press [2] key (GP-GL STEP SIZE).
STEP SIZE setting screen is displayed.
4
Press [1] key (0.100 mm), [2] key (0.050 mm), [3] key (0.025
mm), or [4] key (0.010 mm).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to INTERFACE screen.
6
Press [PAUSE/MENU] key.
It will return to default screen.
Supplement
It will return to INTERFACE screen without
changing the settings when you press the [ESC]
key (CANCEL).
2-68