Related To Plotter Environment; Fan Suction Setting (Fan Power) - GRAPHTEC CE7000 Series User Manual

Related to plotter environment

Fan suction setting (FAN POWER)

This function sets the suction force used to affix media to the plotter.
It may not feed properly if the media is thin, so set to "WEAK".
Operation
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV.).
ADVANCE screen (1/4) is displayed.
3
Press the POSITION ( ) key.
ADVANCE screen (4/4) is displayed.
4
Press the [4] key (FAN POWER).
FAN POWER screen is displayed.
5
Press the [1] key (NORMAL) or the [2] key (WEAK).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to ADVANCE screen (4/4).
7
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
Perform the settings in Normal mode.
Supplement
It will return to ADVANCE screen (4/4) without
changing the settings when you press the [ESC]
key (CANCEL).
10-7