Setting The Mirror Mode - GRAPHTEC FC2250 Series User Manual

Chapter 5 FUNCTION SETTINGS AND OPERATIONS

5.16 Setting the Mirror Mode

When MIRROR mode s selected usng ths functon, the orgn and coordnate axes are nverted as shown
in the figure below.
Origin when MIRROR mode is selected
(1) Press the [PAUSE] key to select PAUSE mode.
(2) Press the [NEXT] key untl the followng menu s dsplayed.
FORCE
I/F
TOOL COND AREA OPT
SPEED
(3) Press the [F4] key (AREA OPT) to dsplay the menu shown below.
FORCE
ROTATE
L.L. U.R.
SPEED
(4) Press the [F3] key (MIRROR) to dsplay the MIRROR mode settng screen.
FORCE
ON
SPEED
The current settng s ndcated by a black dot [
To select MIRROR mode, press the [F2] key (ON).
To cancel MIRROR mode, press the [F4] key (OFF).
After you have selected the desred parameter, press the [ENTER] key to confirm your selection.
(5) Press the [PAUSE] key to cancel PAUSE mode.
•
When the plotter is turned off, the MIRROR mode returns to its default setting (OFF).
•
The MIRROR mode is set to OFF when MARK TYPE 3 is selected.
5-18
Y
Y
Origin
Y
X
OFFSET
FUNCTION
QUALITY
OFFSET
MIRROR
SCALE
QUALITY
OFFSET
MIRROR
OFF•
QUALITY
X
MIRROR mode is selected (ON)
MIRROR mode is not selected (OFF)
X
•
].